Marine 100mL

Product Description

*FOR PROFESSIONAL USE ONLY* (Authorized Installers ONLY)

SOLID.  Marine offers protection against  fouling on the hull caused by the accumulation of algae and/or shells. SOLID. Marine will make the surface so repellent to harsh underwater elements the cleaning process will no longer be a problem

* Easy to Clean * Anti-Graffiti * Exceptional Corrosion Protection * Excellent Adhesion to most substrates * High UV and chemical resistance * Operation Temperatures up to 750 degree C * Excellent Weather Resistance * Low VOC * Outstanding durability * Non-flammable after cured * Ambient Temperature curing * Fluorine-Free

Product Description: SOLID. Marine  . The product is a clear, ready to use, innovative surface coating able to resist water and dirt. By using the Nano technology, SOLID. Marine creates a very good barrier by chemically binding to the substrate, which Provides an easy to clean ability to avoid the water, dirt, grease and other stains.

The protected material can be cleaned numerous times without reapplication. SOLID. Marine  for  is resistant to solvents, acids, bases and chemicals. SOLID. Marine  is applied as one component coating. No mixing with another material is required. Only a thin film of SOLID. Marine  is needed to provide superior protection. Dry to the touch will be accomplished within 1-2 hours at room temperature. Full curing is accomplished at room temperature after applying for 3-5 days.

SOLID. Marine  for Boat/Yacht – can’t be removed by any chemicals; machine polish is only the way to remove it!!!

Spraying:

.08 Tip size is recommended. Spray and level coating until high spots are removed and no longer visible. Let cure for 72 hours

Brushing:

You will get a thick thickness by this method but you will see the visible streaks likes. Brushing only use on the area, which needs protection but doesn’t need the high quality of the surface. This method particularly applies on the anti- graffiti function for the public transportation and walls.

PREPARATION :

Preparation of substrate is crucial for maximum adhesion and performance. Prepare surface and remove oil, contaminants or any unwanted coatings from the substrate. For surfaces that must retain a specific appearance (such as wheels) denatured alcohol may be used. Blow off substrate with a high‐pressure air nozzle to remove any blasting dust left on the surface. Wear safety goggles or face shield for your protection. Work in a well‐ventilated area. If ventilation is not available, wear a respirator

CURING CONDITION :

Allow to air‐dry. Parts will be tack free after approximately 60~120 minutes. Until this point the coating is still wet, and care should be taken to not bump or touch the parts. Parts will be partially cured after 24 hours and fully cured 5 days after application. Finished goods may be shipped after 24 hours when the coating is partially cured.

STORAGE:

SOLID. Marine  for Boat/Yacht is one-component material, without any harder for reactions. It can keep stable in room temperature and no need storage in low temperature condition. The shelf life under room temperature is one year in the original closed package

SOLID. Coatings believes that the information given is an accurate description of the typical use of the product. However SOLID. Coatings Disclaims any liability for incidental or consequential damages, which may result from the use of their products that are beyond its control. Employers should use this information only as a supplement to other information gathered by them and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of their employees. Therefore, it is the users responsibility to thoroughly test the products in their particular application to determine its performance, efficacy, and safety.